Motorola ST7500 - 2.2 Before Power On; 2.2.1 Replacing Antenna

Description Value
(1 W) (1.8 W) (2.7 W)
Standard 1650 mAh
Battery
05/05/90
05/35/60
> 16 h
> 12 h
> 15 h
> 11 h
> 14 h
> 10.5 h
1950 mAh Battery 05/05/90
05/35/60
> 21 h
> 16 h
> 20 h
> 15 h
> 18.5 h
> 14 h
3400 mAh Battery 05/05/90
05/35/60
> 30 h
> 22 h
> 28 h
> 21 h
> 27 h
> 20 h
NOTICE:
The system (SwMI) determines radio transmit and receive times, which affect the actual radio
operating time.
If the radio overheats (due to high ambient temperature or other factors), thermal protection will
reduce transmitter power, which may lead to loss of communication.
You can attach a colorful o-ring to a radio antenna to distinguish radios from one another.
An RFID knob is available as an optional accessory which allows tracking radios easily. The
knob contains an RFID tag which can be read by handheld scanners greatly enhancing the
speed of radio identification. The knob is a retrofit option and can replace an existing volume
knob.
2.2
Before Power On
Read this section before you power on your radio for the first time.
2.2.1
Replacing Antenna
Procedure:
1 Remove the antenna by turning anti-clockwise.
2 Replace the new antenna by insert the screw-in base of the antenna into the antenna terminal
on the top of the radio.
3 Turn clockwise until tight.
MN004519A01-AK
Chapter 2: Getting Started
18