• The radio is not in an active call.
• You cannot press the PTT button.
Procedure:
To enable or disable the SIM card End-to-End Encryption, choose one of the following ways:
If… Then…
If the One-Touch button is configured by
your service provider,
press the One-Touch button.
If you want to operate from the menu, perform the following actions:
a Press Menu→Crypto Menu→Crypto
Function.
b Select Encryption On to enable or En-
cryption Off to disable encryption.
Your radio displays prompts indicating your current encryption state: an appropriate status icon
and the Encryption On or Encryption Off message.
4.16.2
Enabling or Disabling CRYPTR Micro End-to-End Encryption
Prerequisites:
NOTICE: Your radio is either MicroSD card-enabled or SIM card-enabled. This feature is only
available for MicroSD card-enabled radio.
• Ensure that the CRYPTR Micro card is inserted in the radio.
• The radio is not in an active call.
• You cannot press the PTT button.
See CRYPTR Micro End-to-End Encryption on page 121.
Procedure:
1 From the home screen, press Menu→Crypto Menu→Crypto Function.
2 Select Encryption On to enable or Encryption Off to disable encryption.
Your radio displays a status icon and the Encryption On or Encryption Off message to indicate
your current encryption state.
4.16.3
Setting Clear Call Alarm
When and where to use:The Clear Call Alarm menu is used to configure an alarm tone to notify on
any clear transmission.
Procedure:
1 From the home screen, press the Menu key.
2 From the home screen, press the Menu/OK key.
3 Select Crypto Menu→Clear Call Alarm.
4 Select Simplex Calls or Duplex Calls.
5 Select one of the following options:
MN004519A01-AK
Chapter 4: Main Menu
112
To Next Page
Loading...
