Motorola ST7500 - 4.12.4.2 D-PTT Tones; 4.12.4.2.1 Setting D-PTT Tones; 4.12.5 Time and Date; 4.12.5.1 Setting the Time Manually

4.12.4.2
D-PTT Tones
This menu item contains the settings for the Double PTT feature.
The Double PTT feature allows you to send a tone pattern (single, double, or triple) when the radio is in
idle or the Group Call mode by pressing the PTT button twice.
After the D-PTT tone is played, you can press and hold the PTT button once again to get the
permission to talk. Otherwise, if you press the PTT button while the D-PTT tone is played, it is ignored.
After the D-PTT tone is sent, keeping the PTT button pressed results in permission to talk.
The D-PTT tone is sent over the air but is not audible on the sending radio.
4.12.4.2.1
Setting D-PTT Tones
Procedure:
1 From the home screen, press the Menu key.
2 From the home screen, press the Menu/OK key.
3 Select Setup→Tones→D-PTT Tones.
4 Select one of the following options:
• D-PTT Mode – Activates/deactivates D-PTT tone.
• Tone Style– Indicates how many times the D-PTT tone is played.
4.12.5
Time and Date
This sub-menu controls the displayed time and date on the home screen.
NOTICE: If the Home Display Text Message feature is enabled, Home Mode Display Text may
cover time and date, depending on the Configurable Idle Screen settings. Infrastructure
synchronizes the time and date. When not within the infrastructure signal range you can set the
values manually.
4.12.5.1
Setting the Time Manually
When and where to use:If the time cannot update automatically through the infrastructure.
Procedure:
1 From the home screen, press the Menu key.
2 From the home screen, press the Menu/OK key.
3 Select Setup→Time & Date→Set→Set Time.
4 Select Setup→Time & Date→Set Time.
5 Enter current time using Navigation keys or keypad.
6 Enter current time using Navigation keys.
To set the next value, press Menu/OK. To go back to the previous value, press Back.
7 Press Done.
MN004519A01-AK
Chapter 4: Main Menu
106