6 Do one of the following:
• Enter the number or press abc to select the name from your contact list. Press Send.
• Enter the number and press and hold the Menu/OK key. Select Send.
• Select the required talkgroup from the TalkGroup List.
The display shows one of the following delivery reports:
• Status Sent
• Status Failed
4.4.8
Additional Address
The Additional Address feature allows the radio to send Radio Messaging System (RMS) messages
and Local Information Protocol (LIP) reports to additionally defined recipients.
The default addresses for the RMS messages and LIP reports are defined by your service provider.
RMS messages and LIP reports are also sent to selected and enabled additional address.
You can create, edit, and delete additional addresses using the radio menu. For service provider-
configured additional addresses, your service provider can disable the editing and deletion of the
additional addresses.
You can define up to 30 additional addresses.
4.4.8.1
Enabling or Disabling Additional Address
Procedure:
1 From the home screen, press the Menu key.
2 From the home screen, press the Menu/OK key.
3 Select Messages→Add. Address→Enable.
4 Select Messages→Additional Address→Enable.
5 Select one of the following options:
• To activate the feature, select On.
• To deactivate the feature, select Off.
4.4.8.2
Selecting Additional Address
Procedure:
1 From the home screen, press the Menu key.
2 From the home screen, press the Menu/OK key.
3 Select Messages→Add. Address→Select Address.
The radio displays a list of aliases.
4 Select Messages→Additional Address→Select Address.
The radio displays a list of aliases.
5 Scroll to the required alias and press the Menu/OK key.
MN004519A01-AK
Chapter 4: Main Menu
88
To Next Page
Loading...
