When the radio is in normal mode, you are able to browse through all messages in the CO Box.
However, if the radio is in the Call-Out mode, you can only browse through the information regarding
the currently ongoing Call-Out message.
4.4.4.1
Call-Out Icons
Table 26: Call-Out Icons
Icon Description
Read (Old) Call-Out Message in Inbox
Unread (New) Call-Out Message in Inbox
Read (Old) Protected Call-Out Message in Inbox
Unread (New) Protected Call-Out Message in Inbox
Read (Old) Call-Out Message in Outbox
Read (Old) Protected Call-Out Message in Outbox
4.4.4.2
Responding to Call-Out Messages
When a Call-Out message is received and acknowledgment is required, you can response to the
message.
Prerequisites:A Call-Out prompt with user receipt pops-up on your radio display.
Procedure:
1 Select one of the following options:
• Accept
• Standby
• Reject
• Messages
• Exit
NOTICE: Exit is only available after you have responded to the prompt with Accept
or Standby.
Selecting Accept, Standby, or Reject sends user acknowledgment back to the initiator.
2 To response to the Call-Out with a predefined message, select Messages→Send
Message→CO Templates.
NOTICE: Depending on the settings configured by your service provider, you can
response to the Call-Out message with free text by selecting Messages→Send
Message→Editor.
MN004519A01-AK
Chapter 4: Main Menu
83
To Next Page
Loading...
