If… Then…
If you want to remove the protection of
the message,
select Unprotect.
NOTICE: Message protection is
enabled in the inbox and Call Out
inbox. You can only delete unpro-
tected messages.
NOTICE: Message protection is
enabled in the inbox. You can only
delete uprotected messages.
If you want to display the status of the
Store and Forward feature,
select Msg. Details.
4.4.2.4
Embedded Number
The Embedded Number feature allows you to call a number embedded in the message in the Inbox or
Outbox folder. You can also start a group call with the message sender of a talkgroup.
4.4.2.5
Calling Numbers from Messages
The Embedded Number feature is enabled by your service provider. You can return a voice call to the
sender of a message or to any number that is embedded in the message text.
Procedure:
1 From the home screen, press the Menu key.
2 From the home screen, press the Menu/OK key.
3 Select Messages→Inbox.
4 Highlight the required message and select Read.
5 Select the required message.
6 Press the PTT button.
The radio displays a list of numbers, including the number of the sender.
7 To call, select the required number and do one of the following:
• Press the PTT button.
• Press the Send key.
8 Scroll to the required number and press the PTT button.
9 Press Ctype to select one of the following type of calls:
• Private
• Phone
• PABX
10 Press the P2 Programmable button to select one of the following type of calls:
• Private
• Phone
• PABX
MN004519A01-AK
Chapter 4: Main Menu
80
To Next Page
Loading...
