Motorola ST7500 - 4.8.6.1 Viewing Detected Beacons; 4.8.7 Connecting Firearms Devices

the radio. The radio then sends the information within a Location Information Protocol message to the
Switching and Management Infrastructure, and a mapping application decodes the information to
calculate the location of the radio.
Procedure:
1 From the home screen, press the Menu key.
2 From the home screen, press the Menu/OK key.
3 Select Bluetooth→Indoor Location.
4 Select BT Settings→Indoor Loc.
5 Select Change.
6 Select On or Off to activate or deactivate Indoor Location.
Your radio is now able to detect Bluetooth location beacons when Indoor Location is activated.
NOTICE: The use of the Indoor Location feature may have a negligible impact on other
Bluetooth functions on your radio.
4.8.6.1
Viewing Detected Beacons
Prerequisites:Turn on Indoor Location. If Indoor Location is turned off, the screen displays Service
Restricted.
Procedure:
1 From the home screen, press the Menu key.
2 From the home screen, press the Menu/OK key.
3 Select Bluetooth→Indoor Location.
4 Select BT Settings→Indoor Loc..
5 Select Beacons Found.
6 Select the preferred beacon.
The screen displays details of the beacon.
4.8.7
Connecting Firearms Devices
Prerequisites:Only pre-approved firearms devices can be used. The service provider is responsible
for configuring the radio to work with specific devices. See Add Bluetooth Devices on page 117.
When and where to use:To select a firearm sensor device for Bluetooth connection.
Procedure:
1 From the home screen, press the Menu key.
2 From the home screen, press the Menu/OK key.
3 Select Bluetooth→Firearms.
4 Select BT Settings→Firearms.
MN004519A01-AK
Chapter 4: Main Menu
96