Moxa Technologies AirWorks AWK-1131A User Manual

AirWorks AWK-1131A Introduction
1-8
Reset Button
The RESET button is located on the rear panel of the AWK-1131A. You can reboot the AWK-1131A or reset it
to factory default settings by pressing the RESET button with a pointed object such as an unfolded paper clip.
• System reboot: Hold the RESET button down for under 5 seconds and then release.
• Reset to factory default: Hold the RESET button down for over 5 seconds until the STATE LED starts
blinking green. Release the button to reset the AWK-1131A.

Moxa Technologies AirWorks AWK-1131A Specifications

General

Brand	Moxa Technologies
Model	AirWorks AWK-1131A
Category	Wireless Access Point
Language	English