Moxa Technologies AirWorks AWK-1131A - Load Factory Default

AirWorks AWK-1131A Web Console Configuration
3-41
Click Edit to create a new, or edit an existing, user account. The items shown below can be configured.
Field Description Default Setting
Active Select Enable to enable the user account. Disable
User level Administrator: Allows the user to access the Web UI, change the
device’s configuration, and use the device’s import/export
capability.
User: Allows the user to access the Web UI, but the user will not be
able to change the device’s configuration or use the device’s
import/export capability.
Admin
Account name The username of the account. Admin
New Password The password used to log in to the device. moxa
Confirm
Password
Retype the password.
If the Confirm Password and New Password
fields do not match, you will be asked to reenter the password.
N/A
Change Password
Use the Change Password function to change the password of existing user accounts. First input the current
password, and then type the new password in the New password and Confirm password input boxes.
Note: To maintain a higher level of network security, do not use the default password (moxa), and be sure to
change all user account passwords regularly.
NOTE
If the Password
-strength test option is enabled, you will be prompted to use passwords that adhere to the
following password policy:
•
The password must contain at least one digit: 0, 1, 2, …, 9.
•
The password must contain both upper and lower case letters:
•
A, B, …, Z, a, b, …, z.
•
The password must contain at least one of the following special characters:
•
~!@#$%^&-_|;:,.<>[]{}
•
The password must have more characters than the minimum password length (default = 4).