Moxa Technologies AirWorks AWK-1131A - System Status; Network Status

AirWorks AWK-1131A Web Console Configuration
3-36
System Status
The system status section indicates the status of the device memory and CPU usage in the current device.
NOTE
A CPU overload can result in a watchdog
-triggered reboot of the system. Factors such as a high number of
firewall rules (IP/MAC/Protocol filters) and traffic PPS (packet per second) contribute to the rise in CPU usage.
Network Status
The network status section indicates the network status of the device with respect to ARP, bridge status, LLDP,
and the routing table.
ARP Table
Address Resolution Protocol (ARP) Table - indicates the current IP to MAC address mapping for the device.
Bridge Status
Indicates the current status of the network bridge on the device. The interfaces and the corresponding MAC
addresses in this section are the entry points for ingress traffic.