Moxa Technologies AirWorks AWK-1131A - E-Mail Notifications

AirWorks AWK-1131A Web Console Configuration
3-30
Syslog Server Settings
You can configure the parameters for your Syslog servers in this page.
Syslog server 1/ 2/ 3
Setting Description Factory Default
IP address Enter the IP address of the 1st/ 2nd/ 3rd Syslog Server None
Syslog port
Setting Description Factory Default
Port destination
(1 to 65535)
Enter the UDP port of the corresponding Syslog server 514
NOTE
RSSI report events (Only for Client mode)
event type is useful for the site survey stage. However, this
function increases the traffic load
because it needs to use a special utility to retrieve the RSSI values in a
tabular format. So,
we recommend disabling this function during normal usage.
E-mail Notifications
Notification Event Types
Check the Active box next to the event type to enable the event type for email notification. By default, all event
types are deactivated (unchecked).