EasyManuals Logo

Moxa Technologies AirWorks AWK-1131A User Manual

Moxa Technologies AirWorks AWK-1131A
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #46 background imageLoading...
Page #46 background image
AirWorks AWK-1131A Web Console Configuration
3-29
Link fault pass-through LAN/WLAN
disconnected because of WLAN/LAN down
The WLAN/LAN link is down and the Link fault pass-through (LFPT)
disables the LAN/WLAN functionality.
Channel availability check over DFS
frequency (for AP/Master mode)
The channel availability check (CAC) is started on channel
[channel] at [frequency] GHz for 60 sec./
The c
hannel availability check (CAC) task has been completed on
channel [channel] at [frequency] GHz./
A radar signal is detected on channel [channel] at [frequency]
GHz.
AeroLink protection state The AeroLink protection state changes.
AeroLink states: Initialize (init)/ Discovery/ Idle/ Negotiation
(nego)/ Back up/ Active/ Changed/ Undefined (undef)
Configuration-related events Event is triggered when
Configuration Changed A configuration item has been changed.
Configuration file import via Web Console
The configuration file is imported to the AWK-1131A.
Console authentication failure An incorrect password is entered.
Firmware upgraded The AWK-1131A’s firmware is updated.
Loaded the configuration from ABC-01 The configuration is successfully loaded/there is an error loading
the configuration from ABC-01.
Saving configuration to ABC-01 The configuration is successfully saved/there is an error saving the
configuration to ABC-01.
ABC-01 failure AWK-1131A cannot detect an ABC-01 at the console port.
Configuration reset to default The configuration is reset to factory default.
Power events Event is triggered when
Power 1/2 transition (On -> Off) The AWK-1131A is powered down in PWR1/2.
PoE transition (On -> Off) The AWK-1131A is powered down in PoE.
Power 1/2 transition (Off -> On) The AWK-1131A is powered via PWR1/2.
PoE transition (Off -> On) The AWK-1131A is powered via PoE.
Syslog
This function provides the event logs for the Syslog server. The function supports up to three configurable
Syslog servers and Syslog server UDP port numbers. When an event occurs, the event will be sent as a Syslog
UDP packet to the specified Syslog servers.
Syslog Event Types
The event type groups are shown on this page. Select the Enable Logging checkbox next to the event type to
enable logging of the event. By default, all event types are enabled (checked).

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Moxa Technologies AirWorks AWK-1131A and is the answer not in the manual?

Moxa Technologies AirWorks AWK-1131A Specifications

General IconGeneral
BrandMoxa Technologies
ModelAirWorks AWK-1131A
CategoryWireless Access Point
LanguageEnglish

Related product manuals