Moxa Technologies AirWorks AWK-1131A - Page 27

AirWorks AWK-1131A Web Console Configuration
3-10
NOTE
When you switch to
Client mode, a Site Survey
button will be available on the Basic WLAN Setup panel. Click
th
is button to view information about available APs, as shown in
the following figure. You can click on the SSID
of an entity and bring the value of its SSID onto the SSID fi
eld of the Basic WLAN Setup page. Click the
Refresh
button
to update the site-survey table.
RF type
Setting Description Factory Default
2.4 GHz
B Only supports the IEEE 802.11b standard B/G/N Mixed
G Only supports the IEEE 802.11g standard
B/G Mixed Supports IEEE 802.11b/g standards, but 802.11g might
operate at a slower speed when 802.11b clients are on the
network
G/N Mixed Supports IEEE 802.11g/n standards, but 802.11n might
operate at a slower speed when 802.11g clients are on the
network
B/G/N Mixed Supports IEEE 802.11b/g/n standards, but 802.11g/n might
operate at a slower speed when 802.11b clients are on the
network
N Only (2.4 GHz) Only supports the 2.4 GHz IEEE 802.11n standard