Moxa Technologies AirWorks AWK-1131A - Page 74

AirWorks AWK-1131A Additional Consoles
5-3
3. In the Communication Parameter tab of the Property window that opens, select the appropriate COM
port for console connection using 115200 for Baud Rate, 8 for Data Bits, None for Parity, and 1 for Stop
Bits. Click on the Terminal tab, and select VT100 (or ANSI) for Terminal Type. Click on OK to continue.
4. The console login screen is displayed. Log into the RS-232 console with the login name (default: admin)
and password (default: moxa, if no new password is set).
5. The AWK-1131A’s device information and Main Menu will be displayed. Follow the instructions on the screen
to select the administration task that you want to perform.
NOTE
To modify the appearance of the PComm Terminal Emulator window, select
Edit

Font
and then choose the
desired formatting options.
ATTENTION
If you unplug the RS
-232 cable or trigger DTR, a disconnection event will be evoked to enforce logout for
network security.
You will need to log in again to resume operation.