Moxa Technologies ioLogik E2200Series User Manual

ioLogik E2200 Series Introduction
1-7
ioLogik E2214 Specifications
Inputs and Outputs
Digital Inputs:
6 channels
Relay Outputs:
6 channels
Isolation:
3K VDC or 2K Vrms
Digital Input
Sensor Type:
Wet Contact (NPN or PNP) and Dry Contact
I/O Mode:
DI or Event Counter
Dry Contact:
• On:
short to GND
• Off: open
Wet Contact
(DI to GND):
• On: 0 to 3 VDC
• Off: 10 to 30 VDC
Common Type:
3 points per COM
Counter Frequency:
900 Hz, power off storage
Digital Filtering Time Interval:
Software selectable
Relay Output
Type:
Form A (N.O.) power relay
Contact Current Rating:
• Inductive Load: 2 A @ 30 VDC, 250 VAC, 110 VAC
• Resistive Load: 5 A @ 30 VDC, 250 VAC, 110 VAC
Minimum permitted load:
1 A @ 5 VDC
Initial Insulation Resistance:
1000 M ohms (min.) @ 500 VDC
Mechani
cal endurance: 1,000,000 operations
Electrical endurance: 100,000 operations @ 5 A resistive load
Contact Resistance:
100 m ohms (max.)
Pulse Output:
0.3 Hz at rated load
Power Requirements
Power Consumption:
170 mA @ 24 VDC
MTBF (mean time between failure)
Time:
307,239 hrs
Database:
Telcordia (Bellcore)

Moxa Technologies ioLogik E2200Series Specifications

General

Brand	Moxa Technologies
Model	ioLogik E2200Series
Category	Network Router
Language	English