NPort IA5150A/IA5250A Series Choosing the Proper Operation Mode
Console management is commonly used by connecting to Console/AUX or COM ports of routers, switches, and
UPS units. Rtelnet works the same as RAW mode in that only one TCP port is listened to after booting up. The
system then waits for a host on the network to initiate a connection. The difference is that the RAW mode does
not provide the conversion function provided by Telnet. If the connected devices need to use the CR/LF
conversion function when controlling, then users must choose Reverse Telnet mode.
Disabled Mode
When the Operation Mode for a particular port is set to Disabled, that port will be disabled.
To Next Page
Loading...
