Do you have a question about the Moxa Technologies NPort IA5150AI-T and is the answer not in the manual?
Isolation | 2 kV |
---|---|
Certification | CE, FCC |
Serial interface type | RS-232/422/485 |
Serial ports quantity | 1 |
Ethernet LAN data rates | 10, 100 Mbit/s |
Ethernet LAN (RJ-45) ports | 2 |
Supported network protocols | ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, Rtelnet, DNS, HTTP, SMTP, SNTP, IGMP |
Connectivity LEDs | Yes |
Storage temperature (T-T) | -40 - 85 °C |
Operating temperature (T-T) | -40 - 75 °C |
Operating relative humidity (H-H) | 5 - 95 % |
Input voltage | 12 - 48 V |
Safety | UL-508 |
Weight | 475 g |
---|---|
Dimensions (WxDxH) | 36 x 105 x 140 mm |
Provides instructions for connecting the hardware, including power and network.
Guides on determining whether to use static or dynamic IP addressing for the NPort.
Details the process of configuring the IP address using a Telnet connection.
Describes how to set up the IP address using the device's RS-232 serial console port.
Details the functionality and benefits of the Real COM operating mode.
Describes how the NPort functions as a TCP server to accept connections.
Details how the NPort acts as a TCP client to initiate connections.
Explains the UDP mode for faster, efficient data transmission.
Instructions on opening a web browser and logging into the NPort's interface.
Guides on setting IP address, Netmask, Gateway, and DNS server.
Details how to configure serial port parameters like baud rate and data bits.
Configuration options for various operating modes like Real COM and TCP Server.
Filters access to the NPort based on IP address for security.
Steps for updating the NPort's firmware to the latest version.
Step-by-step instructions for installing the NPort Administrator application.
Guides on using Broadcast Search or specifying IP to locate NPort devices.
Details on accessing and modifying various configuration parameters of NPort devices.
Creating and managing groups of serial ports for multi-drop simulation.