NPort IA5150A/IA5250A Series Configuring NPort Administrator
Import Configuration
The Import Configuration function is used to import an NPort IA5150A/IA5250A configuration from a file into
one or more of the same model NPort IA5150A/IA5250A. To import a configuration, first select the target
servers, click the right mouse button, and then select Import Configuration. Follow the onscreen instructions
to locate the configuration file and start downloading the file.
ATTENTION
You can simultaneously
import the same configuration file into
multiple NPort IA5150A/IA5250As that are of
the same model.
To select multiple NPort IA5150A/IA5250As, hold down the Ctrl key when selecting an
additional NPort IA5150A/IA5250A, or ho
ld down the Shift key to select a block of NPort IA5150A/IA5250As
Monitor
Use following method to start the Monitor function.
Broadcast Search Monitor Add Target
1. With Configuration selected under Function, use Broadcast Search to locate all NPorts on your LAN.
2. Next, click Monitor
Add Target and select your targets from the list, and then click OK.
Once the Monitor function is running:
To Next Page
Loading...
Need help?
General
Weight and Dimensions
