Moxa Technologies NPort IA5150AI-T User Manual

NPort IA5150A/IA5250A Series Web Console Configuration
5-36
Monitor Relay Output
Click Relay Output under Monitor to show the current status of the relay output. To cease the Relay Output
warning, click on the Acknowledge Event button.
Change Password
Input the “Old password” and “New password” to change the password. Leave the password boxes blank to
erase the password. If the password is erased, then NPort IA5150A/IA5250A will not have password protection.
ATTENTION
If you forget the password, the ONLY way to configure
NPort IA5150A/IA5250A is by using the "Reset to
default"
button on NPort IA5150A/IA5250A’s top side to “Load Factory Default.”
Remember to export the configuration file when you finish the configuration. By using the Import function
your configuration can be re
-loaded into NPort IA5150A/IA5250A after using “Load Factory Default.”

Moxa Technologies NPort IA5150AI-T Specifications

General

Isolation	2 kV
Certification	CE, FCC
Serial interface type	RS-232/422/485
Serial ports quantity	1
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN (RJ-45) ports	2
Supported network protocols	ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, Rtelnet, DNS, HTTP, SMTP, SNTP, IGMP
Connectivity LEDs	Yes
Storage temperature (T-T)	-40 - 85 °C
Operating temperature (T-T)	-40 - 75 °C
Operating relative humidity (H-H)	5 - 95 %
Input voltage	12 - 48 V
Safety	UL-508

Weight and Dimensions

Weight	475 g
Dimensions (WxDxH)	36 x 105 x 140 mm