Moxa Technologies NPort IA5150AI-T User Manual

NPort IA5150A/IA5250A Series Choosing the Proper Operation Mode
4-5
Console management is commonly used by connecting to Console/AUX or COM ports of routers, switches, and
UPS units. Rtelnet works the same as RAW mode in that only one TCP port is listened to after booting up. The
system then waits for a host on the network to initiate a connection. The difference is that the RAW mode does
not provide the conversion function provided by Telnet. If the connected devices need to use the CR/LF
conversion function when controlling, then users must choose Reverse Telnet mode.
Disabled Mode
When the Operation Mode for a particular port is set to Disabled, that port will be disabled.

Moxa Technologies NPort IA5150AI-T Specifications

General

Isolation	2 kV
Certification	CE, FCC
Serial interface type	RS-232/422/485
Serial ports quantity	1
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN (RJ-45) ports	2
Supported network protocols	ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, Rtelnet, DNS, HTTP, SMTP, SNTP, IGMP
Connectivity LEDs	Yes
Storage temperature (T-T)	-40 - 85 °C
Operating temperature (T-T)	-40 - 75 °C
Operating relative humidity (H-H)	5 - 95 %
Input voltage	12 - 48 V
Safety	UL-508

Weight and Dimensions

Weight	475 g
Dimensions (WxDxH)	36 x 105 x 140 mm