Moxa Technologies NPort IA5150AI-T User Manual

NPort IA5150A/IA5250A Series Configuring NPort Administrator
6-29
3. On COM Grouping page, you can specify one serial port whose signals will be taken into account by the
COM Group and change the Read/Write status for each serial port.
IP Address Report
When NPort IA5150A/IA5250A is used in a dynamic IP environment, users must spend more time with IP
management tasks. NPort IA5150A/IA5250A Series products help out by periodically reporting their IP address
to the IP location server, in case the dynamic IP has changed.
1. Configure the NPort IA5150A/IA5250A with Dynamic IP settings (DHCP, BOOTP, or DHCP/BOOTP). Assign
the remote Auto IP report server’s IP address and UDP port.

Moxa Technologies NPort IA5150AI-T Specifications

General

Isolation	2 kV
Certification	CE, FCC
Serial interface type	RS-232/422/485
Serial ports quantity	1
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN (RJ-45) ports	2
Supported network protocols	ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, Rtelnet, DNS, HTTP, SMTP, SNTP, IGMP
Connectivity LEDs	Yes
Storage temperature (T-T)	-40 - 85 °C
Operating temperature (T-T)	-40 - 75 °C
Operating relative humidity (H-H)	5 - 95 %
Input voltage	12 - 48 V
Safety	UL-508

Weight and Dimensions

Weight	475 g
Dimensions (WxDxH)	36 x 105 x 140 mm