NPort IA5150A/IA5250A Series Web Console Configuration
Command port
Setting Factory Default Necessity
1 to 65535 966 Optional
The “Command port” is a listening TCP port that received IP-Serial Lib commands from the host. In order to
prevent a TCP port conflict with other applications, the user can set the Command port to another port as
needed. IP-Serial Lib will automatically check the Command Port on the NPort IA5150A/IA5250A so that users
do not need to configure the program.
TCP Client Mode
TCP alive check time
Setting Factory Default Necessity
0 to 99 min 7 min Optional
0 min: TCP connection is not closed due to an idle TCP connection.
1 to 99 min: The NPort IA5150A/IA5250A automatically closes the TCP connection if there is no TCP activity
during this given time.
Inactivity time
Setting Factory Default Necessity
0 to 65535 ms 0 ms Optional
0 ms: TCP connection is not closed due to an idle serial line.
0-65535 ms: The NPort IA5150A/IA5250A automatically closes the TCP connection if there is no serial data
activity during the given time.
To Next Page
Loading...
