Moxa Technologies NPort IA5150AI-T User Manual

3
3. Initial IP Address Configuration
When setting up your NPort IA5150A/IA5250A for the first time, the first thing you should do is configure the
IP address. This chapter introduces the methods that can be used to configure the device server’s IP address.
Select one of the initial IP Address configuration methods to configure the NPort
IA5150A/IA5250A’s IP Address. For more details about network settings, see the Network Settings
section from Chapter 5, Web Console Configuration.
The following topics are covered in this chapter:

Initializing the NPort’s IP Address

Factory Default IP Address

NPort Administration Suite

ARP

Telnet Console

Serial Console (19200, n, 8, 1)

Moxa Technologies NPort IA5150AI-T Specifications

General

Isolation	2 kV
Certification	CE, FCC
Serial interface type	RS-232/422/485
Serial ports quantity	1
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN (RJ-45) ports	2
Supported network protocols	ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, Rtelnet, DNS, HTTP, SMTP, SNTP, IGMP
Connectivity LEDs	Yes
Storage temperature (T-T)	-40 - 85 °C
Operating temperature (T-T)	-40 - 75 °C
Operating relative humidity (H-H)	5 - 95 %
Input voltage	12 - 48 V
Safety	UL-508

Weight and Dimensions

Weight	475 g
Dimensions (WxDxH)	36 x 105 x 140 mm