Moxa Technologies NPort IA5150A User Manual

NPort IA5150A/IA5250A Series Web Console Configuration
5-32
ATTENTION
Consult your Network Administrator or ISP for the proper mail server settings. The Auto warning function may
not work properly if it is not configured correctly.
The NPort IA5150A/IA5250A
SMTP AUTH supports LOGIN,
PLAIN, CRAM
-MD5 (RFC 2554).
SNMP Trap Server
SNMP trap server IP or domain name
Setting Factory Default Necessity
IP address or Domain
Name
None Optional
Event Type
Cold start
This refers to starting the system from power off (contrast this with warm start). When performing a cold start,
the NPort IA5150A/IA5250A will automatically issue an Auto warning message by e-mail, or send an SNMP trap
after booting up.
Warm start
This refers to restarting the computer without turning the power off. When performing a warm start, the NPort
IA5150A/IA5250A will automatically send an e-mail, or send an SNMP trap after rebooting.
Authentication failure
The user inputs a wrong password from the Console or Administrator. When authentication failure occurs, the
NPort will immediately send an e-mail or send an SNMP trap.

Moxa Technologies NPort IA5150A Specifications

General

Isolation	1.5 kV
Certification	CE, FCC
Serial interface type	RS-232/422/485
Serial ports quantity	1
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN (RJ-45) ports	2
Supported network protocols	ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, Rtelnet, DNS, HTTP, SMTP, SNTP, IGMP
Connectivity LEDs	Yes
Storage temperature (T-T)	-40 - 85 °C
Operating temperature (T-T)	0 - 60 °C
Operating relative humidity (H-H)	5 - 95 %
Input voltage	12 - 48 V
Safety	UL-508

Weight and Dimensions

Weight	475 g
Dimensions (WxDxH)	36 x 105 x 140 mm