4. Switch back to Program mode with the PROGRAM
button.
5. Store the Program by pressing SAVE PROGRAM button.
Delete Program
Programs can also be deleted at anytime. For this select
the desired program (see “Select Program” section of
this manual) and press the DELETE PROGRAM button.
Back To The Overview
With the WORK button it’s at any time possible to switch
back to the work view/home screen.
PROGRAMS
DELETE
PROGRAM
+
SAVE
PROGRAM
WORK
NOTE
If the “to be adjusted” Program is already load-
ed, the settings can be adjusted and stored directly.
Steps 1 and 2 are therefore not needed.
PA-18-02-R0 (08/2018) 35 / 52 www.carlisleft.com
EN
INSTALLATION
To Next Page
Loading...