4 Basic Operation
4.1 Attaching LUNARto PPE
LUNAR can be tethered to an SCBA using an MSA Retractor Assembly.
WARNING!
Ensure LUNAR is securely attached using a tether by following the instructions below for donning LUNAR.
If using a tether other than the MSA Retractor Assembly, ensure that the tether material and connection method are capable of
withstanding the loading and environmental conditions that will be encountered during use.
Failure to follow this warning can result in serious personal injury or death.
Retractor Assembly Components
01 Split D-ring
02 Retractor
03 Quick-Disconnect Swivel
04 Swivel Button
05 Swivel End
First, remove the Quick-Disconnect Swivel (03) that comes attached to the bottom of LUNAR:
MSA LUNAR 11
US 4 Basic Operation
To Next Page
Loading...
