4.7 Pairing with an External Device
WARNING!
When pairing LUNAR with an external device, LUNAR must only be paired to the external device being worn by the User of
the LUNAR. Failure to pair the two devices or pairing the LUNAR with an external device being worn by another User can
result in unintended alarm communications including, but not limited to:
• Unintended deactivation of the motion sensing alarm on LUNAR
• Command center alarms not being received or being received by an unintended User
• External device or LUNAR alarms not being received by the command center or appearing to come from a different User
than the one experiencing the alarm
• Incorrect alarm information being sent to searchers resulting in the searchers targeting the wrong LUNAR device to locate a
User in distress
Failure to follow these warnings can result in serious personal injury or death.
MSA LUNAR 23
US 4 Basic Operation