PrimaX
GB
53
Special conditions for safe use:
- Do not open the instrument when energised.
- For dust applications the installation conditions according to EN 61241-14 have
to be considered.
- Intensive electrostatic charging processes on the instrument label have to be
prevented.
- Maintenance or repairment according to the type of protection “d” is only al-
lowed by the manufacturer.
- Cable gland: M25 x 1,5 ;Torque 8 -12 Nm; only ATEX certified versions for gas
and dust shall be used.
- NPT ¾”- 14; fixture with 2 layer PTFE sealing tape or according to the instruc-
tions of the NPT supplier; when removed, new PTFE sealing has to be used af-
ter reinstalling; only ATEX certified versions for gas and dust shall be used.
To Next Page
Loading...
Need help?
General
