To Next Page

To Previous Page

3-7

BIOS Setup

Current Language

This allows you to switch the language of

BIOS. Setting options: English, China

(Simplified Chinese), Chinese (Traditional

Chinese), Japanese, Korea,.

Primary/Secondary/Third/Fourth IDE

Master/Slave

Press PgUp/<+> or PgDn/<-> to select the hard

disk drive type. The specification of hard disk

drive will show up on the right hand according

to your selection.

Type Select how to define the HDD parameters

Cylinders Enter cylinder number

Heads Enter head number

Write Precompensation Enter write precomp cylinder

Sectors Enter sector number

Maximum Capacity Read the maximal HDD capacity

LBA Mode Select Auto for a hard disk > 512 MB un-

der Windows and DOS, or Disabled un-

der Netware and UNIX

Block Mode Select Auto to enhance the hard disk

performance

Fast Programmed I/O Select Auto to enhance hard disk perfor-

Modes mance by optimizing the hard disk timing

32 Bit Transfer Mode Enable 32 bit to maximize the IDE hard disk

data transfer rate

Floppy Drive A:/B:

This item allows you to set the type of floppy drives installed. Available

options: Not Installed, 1.2 MB 5¼, 720 KB 3½, 1.44 MB 3½ and 2.88 MB 3½.

Questions and Answers:

Need help?

Do you have a question about the MSI 865PE NEO2-LS - Motherboard - ATX and is the answer not in the manual?

MSI 865PE NEO2-LS - Motherboard - ATX Specifications

General