To Next Page

To Previous Page

Using 2-, 4- or 6-Channel Audio Function

A-5

To have 4-/6-channel audio work, you must set appropriate configuration in

the C-Media software application. Click the C-Media Mixer icon from the

window tray on the bottom, and choose Open.

Then the “C-Media 3D Audio Configuration” will appear . Click on the

Speaker Output tab to configure the audio.

Speaker Output

1. Without the optional S-Bracket:

Software Configuration

h Bass Enhancement: You may enable the Bass Enhancement option to enhance

the bass signal effect, in particular for Earphone Plus Mode. It is available in 4

& 6CH setting.

In 4CH setting: Real channel => Front channel

In 6CH setting: Front and Rear channel => Independent Bass/Subwoofer

channel

Questions and Answers:

Need help?

Do you have a question about the MSI 865PE NEO2-LS - Motherboard - ATX and is the answer not in the manual?

MSI 865PE NEO2-LS - Motherboard - ATX Specifications

General