To Next Page

To Previous Page

3-31

BIOS Setup

Load High Performance/BIOS Setup Defaults

The two options on the main menu allow users to restore all of the BIOS

settings to High Performance defaults or BIOS Setup defaults. The High

Performance Defaults are the values set by the mainboard manufacturer for the

best system performance but probably will cause a stability issue. The BIOS

Setup Defaults are the default values also set by the mainboard manufacturer

for stable performance of the mainboard.

When you select Load High Performance Defaults, a message as below appears:

Pressing ‘Enter’ loads the default BIOS values that enable the best system

performance but may lead to a stability issue.

When you select Load BIOS Setup Defaults, a message as below appears:

Pressing ‘Enter’ loads the default values that are factory settings for stable

system performance.

MSI Reminds You...

The option is for power or overclocking users only. Use of high

performance defaults will tighten most timings to increase the

system performance. Therefore, a high-end system configuration

is a must, which means you need high-quality VGA adapter,

RAM and so on. We don’t recommend that users should apply

the high performance defaults in their regular systems.

Otherwise, the system may become unstable or even crash. If the

system crashes or hangs after enabling the feature, please CLEAR

CMOS DATA to resolve the problem. For more information, refer

to “Clear CMOS Jumper:JBAT1” in Chapter 2.

Questions and Answers:

Need help?

Do you have a question about the MSI 865PE NEO2-LS - Motherboard - ATX and is the answer not in the manual?

MSI 865PE NEO2-LS - Motherboard - ATX Specifications

General