To Next Page

To Previous Page

3-25

BIOS Setup

Onboard Promise IDE

This setting is used to enable/disable the onboard Promise IDE. Setting options:

Disabled, AS S-ATA, AS Raid.

AC97 Audio

Auto allows the motherboard’s BIOS to detect whether you’re using any audio

device. If so, the onboard audio controller will be enabled. If not, the onboard

audio controller will be disabled. If you want to use different controller cards

to connect audio connectors, set the field to Disabled. Setting options:

Disabled, Auto.

Set Super I/O

Press <Enter> to enter the sub-menu and the following screen appears:

OnBoard FDC

Select Enabled if your system has a floppy disk controller (FDD) installed

on the system board and you wish to use it.

Onboard Serial Port A/B

These items specify the base I/O port addresses of the onboard Serial

Port 1 (COM A)/Serial Port 2 (COM B). Selecting Auto allows AMIBIOS

to automatically determine the correct base I/O port address. Settings:

Auto, 3F8/COM1, 2F8/COM2, 3E8/COM3, 2E8/COM4 and Disabled.

Option Description

Auto BIOS will automatically determine whether to enable the

onboard Floppy controller or not.

Enabled Enables the onboard Floppy controller.

Disabled Disables the onboard Floppy controller.

Questions and Answers:

Need help?

Do you have a question about the MSI 865PE NEO2-LS - Motherboard - ATX and is the answer not in the manual?

MSI 865PE NEO2-LS - Motherboard - ATX Specifications

General