USER MANUAL V1.0 | Updated January 19, 2019 38
Screen will be locked at the direction when Lock rotate is selected.
Otherwise select others.
Password
Set to authorize users, or to protect the machine from unauthorized users. Machine is
defaulted as no password.
To activate password protection, from the Settings menu use arrow keys to go to
Password and press Enter. Then go to Active and select Enable to set password.
Enter old password (1234567890), then enter your new password and retype to confirm.
Maximum characters allowed for password is 10 including letters and numbers.
Default - Important setting
Reset your machine settings to the factory defaults. This can be used after updating
firmware or reset machine in case errors occur during operation.
From the Settings menu, select Default and press Enter. A confirmation box will appear.
Select Yes to continue. Otherwise, select No.
Language
Select your interface language. We currently support these languages:
English (Default), Finnish, Spanish, German, French, Russian, Vietnamese,
Chinese, Korean, Portuguese, Polish and Czech.
From the Settings menu, select Language and press Enter. Use the arrow keys to move to
your desired language and press Enter to apply. Otherwise, select ESC.
NOTES:
At default setting, machine just shows 6 languages at Setting
Language. If you don’t
see your desired language in the menu but it is inside our support languages, please do the
following: Add optional language interface
For example user needs to change the machine interface to Korean. They will need the
information below.
Step 1
Copy all file of machine’s firmware to ROOT FOLDER of USB flash. See table below for
more information.
To Next Page
Loading...
