MTX-xG-JAVA-IoT Family
www.mtxm2m.com 2017/07 v1.2 Page 21/105
MTX M2M® by MATRIX ELECTRONICA S.L.U
GSM / GPRS / EGPRS features
GPRS
• Multislot Class 12
• Full PBCCH support
• Mobile Station Class B
• Coding Scheme 1 – 4
EGPRS
• Multislot Class 12
• EDGE E2 power class for 8 PSK
• Downlink coding schemes – CS 1-4, MCS 1-9
• Uplink coding schemes – CS 1-4, MCS 1-9
• SRB loopback and test mode B
• 8-bit, 11-bit RACH
• PBCCH support
• 1 phase/2 phase access procedures
• Link adaptation and IR
• NACC, extended UL TBF
• Mobile Station Class B
CSD
• V.110, RLP, non-transparent
• 9.6kbps
• USSD
Point-to-point MT and MO
Cell broadcast
Text and PDU mode
Storage: SIM card plus SMS locations in mobile equipment
Hayes, 3GPP TS 27.007, 27.005, Gemalto M2M
AT commands for RIL compatibility
Java
TM
Open Platform with
• Java
TM
profile IMP-NG & CLDC 1.1 HI
• Secure data transmission via HTTPS/SSL
• Multi-threading programming and multi-application execution
Major benefits: seamless integration into Java applications, ease of programming, no need for
application microcontroller, extremely cost-efficient hardware and software design – an ideal
platform for industrial GSM applications.
The memory space available for Java programs is around 8MB in the flash file system and around 6MB
of RAM. Application code and data share the space in the flash file system and in the RAM.
Microsoft
TM
compatibility
RIL for Pocket PC and Smartphone
Firmware update from host application over USB.
Interfaces (depending on models)
Supports a USB 2.0 High Speed (480Mbit/s) device interface, Full Speed (12Mbit/s) compliant
Adjustable baud rates: 1200bps to 921600bps
Autobauding: 1200 to 230400bps
Supports RTS/CTS hardware flow control
Multiplex ability according to GSM 07.10 Multiplexer Protocol
To Next Page
Loading...