Mod. 6609d-6612d: Automatic Forms Cutter 13.12.2006
-14-
The PROG and INFO buttons have no function during continuous operation.
3.1.2 Panel keys
The 4 panel keys have the following functions:
PROG The PROG button switches between the functions program selection and parameter selection.
INFO The INFO button gives information referring to this instruction manual.
If the OMR system is used during STOP the code is d isplayed.
(For service functions see Section 3.1.5).
START This button starts the machine.
STOP When the STOP button is pressed, the machine will stop at the end of the current cycle.
3.1.3 Display messages
The following messages can appear on the display:
PAPER ??? If there is no paper in the forms cutter the word P APER ??? will appear in the lower display and
the machine will stop. The forms cutter also stops at the end of the paper.
COVER ??? If the transparent cover is opened or even just sl ightly lifted during operation, the lower display
will show COVER ??? and the machine will stop at the end of the current cycle.
READY !!! This message appears after the paper has been positioned at the blade edge before starting
the machine. When the Start button is then pressed, continuous operation begins.
CALL SERVICE If a 3-digit number (e.g. 031) is shown, this is a sign of malfunction. Make a note of the 3-digit
number and inform the service technician. (For service messages see Section 3.4.2),
INTERFACE The interface connection on the machine or on an additional machine is defective. The service
technician should be informed.
ID-CHIP The ID-chip on the main board is missing or is defective - inform service technician.
COOLING FAN The filter needs cleaning.
Additional fan defective (applies to model 6611/6612 only) - inform service technician.
ADJUST When using the OMR system (the adjustment line is w ithin the groove of the reading head) the
reading head can now be adjusted. For further information see Section Reader.
READ ERROR The code that has been detected is shown in the lower window on the display
(e.g. 0000000001001001). For further information see Section Reader/Read errors.
STOP Appears when the Stop button is pressed.
To Next Page
Loading...