Muller 6609d - Speed; Pause

Mod. 6609d-6612d: Automatic Forms Cutter 13.12.2006
-24-
3.3.1.2 Parameter f) Speed
In the Speed parameter the feed rate can be altered from level 1-7
(level 7 = maximum speed).
F4 - Press Input
The speed can also be changed during continous
operation. The change will automatically be saved in
the current programm.
F1 and F2 - Select level 1-7
F4 - Exit
3.3.1.3 Parameter g) Pause
In the Pause parameter seven different pause intervals (after cutting) can be preset.
The shortest interval is level 1 = 0,03 sec; longest interval is level 7 = 0.21 sec.
F4 - Press Input
The pause interval can also be changed during
continous operation. The change will automatically be
saved in the current program.
F1 and F2 - Select level 0-7
F4 - Exit