Mod. 6609d-6612d: Automatic Forms Cutter 13.12.2006
-20-
3.2.1.4 Parameter d) Counter
In this parameter a programmable counter can be preset. It is used if on reaching a given number of fo rms
a function must be carried out which has been set i n parameter e) Counter Function. In addition the SUB-counter
(= group counter) and the ACT-counter (= actual) can be set at 00000.
F4 - Press Input
F1 - Select number (0-9) (R)
F2 - Current write position =_ (R)
F3 - Set SUB-counter at 00000
(first time F3 is pressed)
The SUB-counter is used for all operations with counter
functions (except NONE).
F3 - Set ACT-counter at 00000
(second time F3 is pressed)
The ACT-counter can be used as a daily counter (or for
a particular job).
F4 - Exit
To Next Page
Loading...