Muller 6609d - Technical Data; Number of Cuts Per Hour; Dimensions

Mod. 6609d-6612d: Automatic Forms Cutter 13.12.2006
-51-
4.3 Technical Data
Number of cuts per hour
Model: 6609 6610 6611 6612
Type of cut: Single Double Single Double Single Double Single Double
Form length:
4" 17000 13000 20000 15000 23000 17000 27000 20500
8" 11000 9500 15000 12000 18000 14000 24000 17500
12" 8000 7500 12000 10000 15000 12000 18000 14500
These performance figures may vary by – 5% and represent machine cycle performance only (without paper).
Form length: min. 12/6" Paper weight: min. 40 g/m
2
max. 999/6" max. 200 g/m
2
Form width: min. 88 mm max. 500 mm Basis weight for
Edgetrim: 28mm (option 60 mm) multipart forms: max. 350 g/m
2
Cuttingtolerance: – 0,3 mm
Standard Option
Input terminal Interface to Inserters
Transp. cover w. auto stop Stacker tray
Rim chopper Automatic lowering stacker
Automatic stop at end of paper OMR reader (programmable)
Self diagnostic center Center Slitter
Electronic fine adjustment Additional Vertical Slitter
High speed interface Group separation
(other forms processing systems can Tension control
be connected to high speed interface - 6610, Remote control
6611,6612 and 6613 with online interface)
Multifunction counter
Length steps 1/6",1/8 ", and 1/24"
Stand
Dimensions Weight
Width without/with input terminal: 760/850 mm Form cutter incl.
Height without/with input terminal: 1090/1200 mm Stand: 80,0 kg
Length without/with standard tray: 525/960 mm Stacker tray/standard: 5,0 kg
Finish Two colours
Connected loads:
Single-phase a.c. 50/60 Hz
Voltage: 115V / 230 V
Power consumption during continuous operation: 600W/2160 kJ/h (depending on cycle speed
and number of systems connected)
Stand by: 50 W
Noise level: 68 dB/A
Subject to alteration