Mod. 6609d-6612d: Automatic Forms Cutter 13.12.2006
-27-
Programs can only be entered or altered in program slot 00.
3.3.1.6 Parameter l) Copy
Here you can copy programs from other program slots into the current program slot and save them.
F4 - Press Input
F1 - Always goes to program slot 00
F2 - Advances 10 program slots (R)
F3 - Advances 1 program slot (R)
F4 - Exit
Example:
A program that has been entered or altered in program slot 00 is to be stored in slot 30.
F4 - Select program slot 30
Press PROG and select parameter l) Copy with F1
To Next Page
Loading...