Muller 6609d - Further Display Functions; Information to the INFO-Button

Mod. 6609d-6612d: Automatic Forms Cutter 13.12.2006
-15-
3.1.4 Further display functions
SLOW FLASHING of numbers indicates that input is possible. The set values can be altered or new
values can be entered or selected.
FAST FLASHING of numbers indicates that the next working step must now be carried out, e.g.
pressing a function key to carry out or end an operation.
DISPLAY TEXTS All texts in the display are available in various languages which can be obtained by
starting the appropriate service number (see Sectio n 3.4.1 SERVICE ROUTINES).
(R) The sign (R) in the operating instructions stands for "rotating function", i. e. after the
last value or position has been reached, the first value or position will reappear.
In addition all keys which display several responsi ve values have a repeat function, i.e. by holding t he button down
it repeats its function.
..... Panels with a grey background in the operating instructions indicate a flashing display.
See above for notes on the flashing speed.
3.1.5 Information to the INFO-button
After pressing the INFO-button a number appears on the display. This number represents sections
- as the table shows - in the operating manual.
INFO-Nr. section contents
1 2.2
Selecting the program
2 3.3.1.1
Parameter a) Label
3 3.2.1.1 Parameter b) Length
4 3.2.1.3
Parameter c) Cut
5 3.2.1.4 Parameter d) Counter
6 3.2.1.5
Parameter e) Counter Function
7 3.3.1.2 Parameter f) Speed
8 3.3.1.3
Parameter g) Pause
9 3.3.1.4 Parameter h) Fine Position
10 3.2.1.2
Parameter i) Special Length
11 3.2.1.2 Parameter j) Program Sequence
12 3.3.1.5 Parameter k) Reader
13 3.3.1.6
Parameter l) Copy
14 3.3.1.7 Parameter m) Programming the fold length