Installation
Ultima Hooklift 01/2020
57
6.7 Connectivity gateway antenna
The gateway antenna is delivered loose in the packing box and the antenna bracket is installed
in front of the left side subframe beam. Exception is the hooklift with tool console where the
antenna is preinstalled in the factory.
The best place for the antenna is on top and at back of the truck cabin.
The gateway module is installed on the control valve bracket.
The illustration below is showing the location of the antenna bracket in new hooklift delivery.
The correct and suitable location must be checked during the installation, before the connectiv-
ity gateway is taken into use.
THE ANTENNA SHOULD BE INSTALLED TO A POSITION WHERE VISIBILITY
TO THE SKY IS AS GOOD AS POSSIBLE!
CV side CV front
CV tool console
To Next Page
Loading...