MultiOne 6 Series User Manual

Instruction manual (Translation of the original instructions)
CM150032EN - 16.06.15 - 05 (11.07.18)
59/76
Self-moving Compact wheel loader, articulated frame, equipped with
multipurpose quick coupler, MULTIONE 6 Series
MultiOne SRL
FIG. 37
32
1
4
9.8.5 Hydraulic oil level
To check the hydraulic oil level proceed as follows:
1) Raise the lifting boom and rotate backwards the quick coupler.
2) Turn off the machine and secure the arm in the upright position with the safety block (see par. 9.3).
3) Unscrew the knob (FIG. 38 - Ref. 2) to open the cover (FIG. 38 - Ref. 1) located near the right front wheel.
4) Remove the cap of the hydraulic oil tank (FIG. 38 - Ref. 3).
5) Check that the oil level reaches and does not exceed the MIN mark on the dipstick (FIG. 38 - Ref. 4).
6) If needed, add the appropriate type of hydraulic fluid: 0280 PAKELO HYDRAULIC EP AL ISO 46.
FIG. 38
1
2
3
MAX
MIN
4
MAINTENANCE -9

MultiOne 6 Series Specifications

General

Brand	MultiOne
Model	6 Series
Category	Compact Loader
Language	English