MultiOne SRL
Self-moving Compact wheel loader, articulated frame, equipped with
multipurpose quick coupler, MULTIONE 6 Series
Instruction manual (Translation of the original instructions)
CM150032EN - 16.06.15 - 05 (11.07.18)
42/76
8.3.2 Starting up
DANGER
BEFORE PROCEEDING TO STARTING OF THE MACHINE MAKE SURE THAT, IN THE RADIUS OF TEN METRES THERE ARE NO
THINGS, ANIMALS OR PEOPLE WHOSE SAFETY MAY BE AFFECTED ACCIDENTALLY.
WARNING
ALL THE CONTROLS OF PAR. 8.2 MUST BE CARRIED OUT BEFORE STARTING UP THE MACHINE.
BEFORE STARTING UP THE MACHINE IT IS COMPULSORY TO CHECK THAT ALL CONTROLS ARE IN NEUTRAL POSITION AND
THAT THE PARKING BRAKE HAS BEEN INSERTED.
BEFORE STARTING UP THE MACHINE MAKE SURE THE SCHEDULED MAINTENANCE HAS BEEN CARRIED OUT, PARTICULARLY
THE CLEANING OF THE MACHINE. MAKE SURE THERE NO OBJECTS OR MATERIAL THAT PREVENT THE PROPER OPERATING
CONTROL.
To start the engine proceed as follows:
1) Set the yellow selector switch (FIG. 20 - Ref. 1) in pos. “Center”. If the switch is not in this position, the machine will not
start.
2) Set the throttle (FIG. 20 - Ref. 2) at minimum: Pos. “Turtle”.
3) Turn the key in Pos. “2” to activate the glow plugs for at least 5 seconds.
4) Turn the key (FIG. 20 - Ref. 3) in Pos. “3” for 2 seconds, if the engine does not start, release the key and start from step 1).
ATTENTION
BEFORE USING THE MACHINE, WE ADVISE TO EFFECTUATE SOME “USING TESTS” TO ACQUIRE A GRADUAL MASTERY OF THE
FEATURES OF THE MACHINE.
FIG. 20
3
1
2
8- OPERATION
To Next Page
Loading...
Need help?
General
