Instruction manual (Translation of the original instructions)
CM150032EN - 16.06.15 - 05 (11.07.18)
43/76
Self-moving Compact wheel loader, articulated frame, equipped with
multipurpose quick coupler, MULTIONE 6 Series
MultiOne SRL
8.3.3 Handling
To move the machine proceed as follows:
1) Turn on the machine (see par. 8.3.2).
2) Release the parking brake (see par. 8.3.7).
3) Increase engine rpm by actuating the throttle control lever.
4) Press the pedal relative to the direction of “Forward” (FIG. 21 - Ref. 1) or “Reverse” (FIG. 21 - Ref. 2).
5) Using the steering wheel set the direction of travel.
DANGER
IT IS COMPULSORY TO MOVE THE MACHINE WITH THE CABIN DOOR CLOSED (IF AVAILABLE). OTHERWISE THE DOOR COULD
BE IRREPARABLY DAMAGED BY THE MOVEMENT OF HALF-FRAMES DURING STEERING.
YOU MUST REDUCE SPEED TO IDLE WHEN MAKING STEERING NOT TO AFFECT THE STABILITY OF THE MACHINE.
IT IS COMPULSORY TO ADJUST THE SPEED IN RELATION WITH THE GROUND ON WHICH THE MACHINE IS OPERATING. WHEN WORKING
ON UNEVEN OR SOFT GROUNDS REDUCE THE SPEED AT HIS MINIMUM (MAX 3 KM/H) AND KEEP THE ATTACHMENT AND THE LOAD AS
NEAR AS POSSIBLE TO THE GROUND.
DANGER
IT IS FORBIDDEN TO MOVE THE MACHINE KEEPING LIFT THE LIFTING ARM, ATTACHMENT AND ANY LOAD.
IT IS FORBIDDEN LEANING FROM THE DRIVING SEAT WHEN THE MACHINE IS MOVING.
DANGER
REMEMBER THAT, WHEN TURNING, THE DRIVER´S SEAT EXTENDS BEYOND THE TURNING RADIUS OF THE WHEELS. PAY
ATTENTION TO THE PRESENCE OF OBSTACLES (SEE FIG. 22).
2 1
FIG. 21 FIG. 22
OPERATION -8
To Next Page
Loading...
Need help?
General
