19 of 20
04/23/2020
Subject: FreshBlender FAQ & Troubleshooting
How to Set Dispense Calibration
NOTE: Visit https://www.multiplexbeverage.com/Videos for
video instruction.
Gather the following supplies
Digital Scale Set to ounces
Empty & Clean Cups
1. Enter the Employee or Manager Menu.
2. Select the CALIBRATION button.
3. Select what is going to be calibrated, ICE, WATER or FLAVOR.
NOTE: If calibrating ice or water these will only dispense 1 time,
flavors will take an average of 3 -5 dispenses.
4. Follow the on screen instructions and place a cup in the
dispense area.
5. Press the button to dispense when ready.
6. When dispense has finished weigh the cup and enter the
weight of the dispense into the screen, then press enter.
7. Repeat this 3 - 5 times as prompted by the screen.
8. Once completed you will be returned to the main
calibration menu.
9. The ice, water, or flavor is now calibrated, go back to
calibrate more selections or press back and logout to go
back to the drink making menu.
To Next Page
Loading...
