20 of 20
04/23/2020
Subject: FreshBlender FAQ & Troubleshooting
Shuttle and Rail
Shuttle may not travel along rail correctly due to lack of
cleaning, incorrect installation, missing magnets or being
bumped.
MAGNETS
Shuttle has five (5) magnets on bottom. Magnets must be
present and kept clean and free of debris. (See FIGURE 1)
INSTALLATION
Before installing Shuttle and Rail make sure both have been
cleaned and sanitized. (See FIGURE 2)
CALIBRATION
Before calibration make sure rail and shuttle are clean and
installed correctly.
1. Login to the MANAGER Menu.
2. Select the CALIBRATION button.
3. Select SHUTTLE CALIBRATION.
4. Follow onscreen instructions.
FIGURE 1 -Shuttle and Magnets on Bottom
FIGURE 2 -Install Shuttle Rail Correctly
FIGURE 3 -Calibration
To Previous Page
Loading...
Need help?
General
