Multiplex FreshBlender Faq & Troubleshooting

3 of 20
04/23/2020
Subject: FreshBlender FAQ & Troubleshooting
How to Make a Drink
NOTE: Make sure correct cup size is being used.
Follow prompts on screen to make a drink.
1. From Main Menu select TOUCH TO START
2. Select a category
3. Select a flavor
4. Select cup size.
5. Place correct size cup in dispense chamber then press
START.
6. Do not take cup until screen prompts for cup removal.
No Cup Found
No Cup Found message appears when making a drink
• Verify correct size cup in drink shuttle
• Calibrate sensors.
- Login as MANAGER using 3 corner touch.
- Select SERVICE INPUTS then select CUP DETECTION..
- Follow onscreen instructions to calibrate.
• Disable the cup sensor feature.
- Login as MANAGER using 3 corner touch.
- Select SETTINGS then select CUP DETECTION.
- Turn cup detection OFF.
FIGURE 1 - Use Correct Cup Size
12 oz 16 oz 20 oz

Multiplex FreshBlender Specifications

General

Brand	Multiplex
Model	FreshBlender
Category	Dispenser
Language	English