MultiTaction MT557D - Set up the Tracking Engine

MT CELL SETUP MANUAL MT556XNB, MT556UNB AND MT557D | 32
8 SET UP THE TRACKING ENGINE
Revision 3.0 www.multitaction.com
15.9.2020
P/N: MT2201012
8 Set up the tracking engine
The tracking engine runs automatically on the Cell’s internal computer. It processes image data
captured by the Cell’s camera matrix as users touch the screen. The tracking engine then outputs
this information as tracking data (also called touch data) to touch-enabled applications. Tracking
data can include fingertip locations, infrared pen locations, plus marker locations and marker code
values.
Instructions for configuring the tracking engine are online, at address:
https://hardware.multitaction.com/