MultiTaction MT557D - Before You Start; Proper Environment; Normal Operating Conditions

MT CELL SETUP MANUAL MT556XNB, MT556UNB AND MT557D | 13
4 BEFORE YOU START
Revision 3.0 www.multitaction.com
15.9.2020
P/N: MT2201012
4 Before you start
4.1 Proper environment
Choose a well-ventilated, cool space for setting up the display.
Caution:
Radiating heat sources (like halogen spots) can damage the display.
Keep the Cell away from strong spot-light areas.
Intense sunlight can damage the display.
Place the Cell in a space where intense sunlight does not hit the display area (front panel).
Attention:
Les sources de dégagement de chaleur rayonnée (notamment les lampes halogènes) peuvent
endommager l'écran.
Maintenir la Cellule éloignée des zones à forte source de lumière.
Une lumière solaire intense peut endommager l’affichage.
Placer la cellule dans un endroit où les rayons solaires intenses n’atteignent pas l’affichage
(panneau avant).
4.2 Normal operating conditions
MultiTaction Cells are designed to operate normally for extended periods of time (up to 24 hours
per day). Using a Cell under normal operating conditions ensures maximum performance.
The following table contains the normal operating conditions for Cells.
Condition
Correct parameters
Temperature
0° to 35° C (32° to 95° F). Optimal performance 20° to 25° C (68° to 77° F)
Humidity
Non-condensing < 80% RH
Display pattern
A moving picture or regularly changing animation
Sunlight
No intense sunlight on the display area (front panel)
Infrared sources
Do not use in the vicinity of strong spot-light areas or other strong infrared
sources
Radiating heat
Do not use in the vicinity of strong radiating heat sources
Dust
Clean dust-free environment