Muratec MFX-2030 User Manual

2-27Network settings
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
Network settings
Logging out
1
Press [Reset] on the control panel.
2
Press [Logout].
NOTE:
• While you are logged-in, you will be asked whether you want to log out
whenever you press [Reset]. If you want to remain logged-in, however wish to
change modes, press [Enter] or any key.
• If you press [Reset] again on this screen, you will return to the standby mode.

Muratec MFX-2030 Specifications

General

Brand	Muratec
Model	MFX-2030
Category	All in One Printer
Language	English